My main career choice is to go to welding school in Tulsa, Oklahoma and get my welding certificate and become a professional welder. Right after high school I will be moving down there for welding school. I’m still deciding if I want to just go for the 7 months just for the welding certificate or if I want to go for 14 months and become a supervisor. I’m really just aiming for that first 7 months of welding school. That’s going to determine whether I go that extra 7 months or not. I choose welding as a main career choice because growing up I have always played with fire and have always loved melting things down. At first I wanted to be a fireman but they put fire out so once I saw that welders melt stuff down I choose that. My momma always told me to choose that as a career since I stayed playing with
The recruiter told me Tig welding would be the best choice for me but I don’t know if I’m sure on that. I did a little research on pipe line welding but I couldn’t find too much of noting on the website I was on. The recruiter also told me Tig welding will be the hardest and take the longest to learn. I aren’t even tripping about that though because I know that in order for me to succeed something have to be hard alone the way, nothing comes easy for nobody. The only thing I am honestly worried about is moving way to Oklahoma just to go to welding school. I don’t want to go way down there and get home sick then, I be trying to run back home to my parents or to my home town. I’m debating on whether to try and finding a closer welding school or even a welding school down here in Arkansas. It’s a welding school in Fort Smith, Arkansas also one in Camden, Arkansas. I even heard we had a welding school down here in Jacksonville but I have not seen it yet or found it I even drove around looking for it but I could not find
Welding is a dangerous job because you can hurt your eyes from the flash if you don’t wear eye protection. Yes pipeline welding dangerous, but it is wrong because it is only dangerous when proper safety precautions aren’t taking place. Welding is dangerous because pieces of metal can fall on you and you can get flash burn. And you can be exposed to gases, fires, explosions, and electric shock. But the only way these things happen is when safety measures are ignored.
Even though welding has been around for a long time, most of the best inventors were around during the 19th century and have changed the way thing are done today. During the 20th century, many technological advancements developed and have made welding easier because of the different types of welding that have been developed. Welding impacted the world during World War l, because during the war armaments that were going to be utilized were ordered in tremendous amounts. Therefore, welding has been around since the Iron Age and has let people build strong steel and powerful armament such as Weapons, tanks, and planes. Finally, welding has had many advancements, and will continue to do so in the future, because the world needs
To begin with, Study.com tells that the lowest level of education required is a high school diploma or equivalent. Many employers may require an employer- based welding test. Some employers look for a certificate or undergraduate degree from a technical school (Study.com). Next, it is important to note where training is available. WATC.edu states, that they offer a welding program. WATC is located in Wichita Kansas. Their welding program allows students to gain knowledge and skills in cutting, shielded metal arc welding, gas metal arc welding, gas tungsten arc welding, and provides some exposure to oxy-acetylene cutting and welding (WATC.edu). In addition, the length and cost of the training is an important consideration. WATC.edu shares, that there are 5 different degree and certificate options. The one I would be interested in is the Welding Technical Certificate option. This one would be a total of 46 credit hours and would cost a total of $10,524. Finally, this job requires certain traits, talents and interests. The Occupational Handbook adds, that welders often must work in awkward positions using tools, so they need to be able to put up with that. A lot of times, overtime will be present. So you would have to be available for overtime if needed. Welders are required to lift heavy objects sometimes. So a welder should be fairly strong (The OCO). I think that being a welder would be hard work. I feel that I would be able to work hard enough to be a welder. I now know what traits a person should have, in order to be a welder. In summary, there are educational and personal qualifications to consider if I want to become a
Welding is a excellent career choice for those who like to build things with their hands and have a strong attention to detail. It requires an extensive amount of knowledge and skill but for those who get a solid grasp of the respected trade they're rewarded with tremendous job opportunities and first-rate pay.
The career I have chose is Physical Therapy(PT). Physical Therapist do many different things, but their main function is to help impaired or physically disabled people enhance their movement and handle their pain. Physical Therapist are a main source in the rehabilitation, medical care and prevention of people with long lasting illnesses or damage. The reason I chose this career is because I love helping people and enjoy seeing people be motivated and succeed at their task. To help someone gain full strength in their limbs or maybe even learn how to walk again is my lifelong dream. It is important to understand the education or training requirements, skills or talents needed, salary and benefits offered, and the duties for a particular career
My chosen career field is in public service. Precisely a career in firefighting. I believe firefighting is a great career choice as I enjoy the work that it involves, and there is a demand that will never stop for firefighters, as fire will always be around forever. The fire department offers a large variety of services to the public. Some of the major tasks that are performed in the fire service range from providing medical care as an Emergency Medical Technician, Entering a burning structure to search for any trapped occupants, suppressing the fire from the exterior or interior, removing a victim that is trapped inside a vehicle involved in an accident, cutting up a tree that fell over the roadway, to helping the elderly up into bed after a fall. Most of these skills requires much training and knowledge and the ability to perform in stressful situations and still remain calm enough to execute clear, and accurate decisions when it involves your life, a fellow firefighters, and even civilian lives. The conditions in which firefighters work in are always changing. One minute, you can be in the middle of a busy highway in the middle of winter at the scene of a serious injury motor vehicle accident with victims trapped and then an hour later you can be at the scene of a fire, entering a building that is structurally unsafe, burning at hundreds of degrees, wearing 70 lbs of extra gear and equipment to save the life of a trapped occupant. You never know what the call will be, when it will be, or what will happen.
scientific experiments (Go welding: history of welding 1). Conventional welding is most easily explained as arc welding processes. Some arc welding processes are TIG welding, Stick Welding(SMAW), and MIG welding. TIG stands for Tungsten Inert Gas welding this means that using tungsten as a electrode and an inert gas, which is usually argon, the weld is produced by creating an arc between the piece being welded and the tungsten electrode. SMAW or stick welding utilizes a stick electrode held in a clamp surrounded by a powdered substance to weld. Mig welding uses a machine that holds a wire feeder within it, the wire feeder feeds the wire electrode through a tube to a gun that slowly sends out the wire as well as a steady flow of inert gas. These and other processes classified as conventional welding processes are the best processes for welding jobs because they are more cost effective, more...
Although that is the easy work the contractors have many more jobs they have to know how to do from running the pipe rigid, aluminum, or stainless, knowing how to bend the pipe and what they take-ups are to build the pipe such as rigid pipe has more take up if you are bending a ninety degree pipe than emt pipe. Also, you have to learn how to bend offsets that are harder than bending straight pipe such as a ninety. They have to go from running the pipe to pulling the wire and running cable tray for the wire to set in . You run the pipe to machines to make them run and also to stop or start the machines from disconnects or start stop buttons. The salary for most electrical all depends if that person is a helper or a leader the helpers that go to college and get a degree usually start of at $16 dollars and hour also depending on the region you are from and what kind of work you do industrial, commercial, or residential.
"MIG Welding—The Basics and Then Some." - TheFabricator.com. N.p., 13 July 2004. Web. 15 Apr. 2014.
There is different types of rods and different types of ways to weld. You need a lot of training for it. There are many schools and colleges you can go to receive welding education. The most common welding processes are Gas Metal Arc Welding, Flux Core Arc Welding, Gas Tungsten Arc Welding and Shielded Metal Arc Welding. The easiest of these is the Gas Metal Arc Welding. Welding options are stick, flux core, tig, and mig. The pipeline tig and stick welds a lot more than the other .The pipeline use many types of techniques but, the most common on the pipeline is downhill root pass and the up hill pass. The median annual wage of welders, cutters, solderers, and brazers is
The career field I chose is to be a firefighter. The reason why I want to be a firefighter is because they help people and prevent fires from spreading. I’ve always wanted to help people everywhere, because I don’t like it whenever if there is an accident and some people died and lost their loved ones, people talking crap about them and just talking and pointing the cameras in their face watching them cry. I want to help people and make a difference and help protect people’s life, and be someone people recognize when I walk by them.
Welding is an art, science, and high paying career all in one. Welding is the most effective way to join two pieces of metal, it is the only way to join them so they act as one. Numerous things in our daily lives has been welded from coffeepots to skyscrapers. Welding can be done almost anywhere outdoors, indoors, underwater, and even space (“Welding Basics”). It is practically
Jonathan Atteberry claims, “T.I.G welding is difficult to learn and requires an elaborate welding rig of skills. It also uses a lot of electricity to make the welds clean and spatter less” (Parag 5). T.I.G welding is hard to learn because people have different hand coordination.... ... middle of paper ...
It has taken a very long time for me to decide on the path that I wanted to take for my career. I have almost always known that I wanted to be an engineer. I was always more interested in applying my knowledge to solve problems rather than just research and understand the world. However, I had little to no inkling as to which field of engineering I wanted to go in to. I had always been a dabbler, involving myself in a large variety of activities with the interest of learning about how stuff works. I started out learning how to use the tools in the shed outback, making pinewood derby cars and model rockets. I would help my dad with home improvement and repair projects around the house. As time went on, my ability learns and apply
Choosing a career is one of the most important decisions a person has to make in their life. It is so important because that is what we will have to do to support ourselves throughout life. Imagine being stuck in a dead end job and having to go to work every morning and dreading it. That is no spending oneÕs time and life is too short to work 35 years and be unhappy with it. If a person likes the job they do then it is not work, because finding satisfaction out of a job can bring great happiness. That information has enabled me to make the decision of choosing my area of study and career in the field of Information Technology.