Wait a second!
More handpicked essays just for you.
More handpicked essays just for you.
good hazardous waste management
good hazardous waste management
Don’t take our word for it - see why 10 million students trust us with their essay needs.
Recommended: good hazardous waste management
Cleaning Up the Soil
Industries spend millions of dollars to clean up hazardous wastes. Just one 55-gallon drum of waste can contaminate a lot of soil and water. Although new regulations ban traditional landfill waste, it was not long ago that hazardous waste was routinely dumped in landfills and at many manufacturing sites.
Liquids and solvents can leak into the soil causing contamination. Cleanup costs are enormous and often prevent businesses from continuing normal operations. Numerous industries are faced with the the challenge of cleaning up the soil.
When soil is contaminated, it may be mixed with lime which neutralizes the harmful elements. However, this method is not always successful. Most of the time, soil must be dug up and transported via trucks to special landfills and incinerators. In addition to high costs, transporting contaminated soil puts people at risk.
During the last decade, scientists have been exploring innovative alternatives to save money and to improve safety. Overall there are more than one hundred new technologies in various stages of development. The new technologies focus on treating the contamination on-site as opposed to established technologies where treatment is conducted off-site. Supporters contend that these new technologies will lead to a more complete cleanup at a fraction of the cost.
Pollution-Eating Bacteria
Pollution-eating bacteria are used to clean soil that is contaminated with petroleum wastes. Researchers have successfully developed a bacteria that reduces the complexity of oils and gasoline.
Soil Washing
Another new method is soil washing. A solution of detergents has been developed that washes the PCBs and oils from soil. The solution soaks down through the soil and collects the PCBs at the base of the soil. The PCBs can be seperated from the solution and are incinerated. The solution can then be reused after the PCBs are extracted.
Bioremediation
A natural soil bacteria has been developed to clean groundwater and soil that is contaminated with chlorinated solvents such as those found in dry cleaning fluids. Test results show that this bacteria has cleaned water sufficiently to meet EPA drinking water standards. This process of using a natural bacteria to clean the water is called bioremediation.
Bio-venting/Vacuum Extraction
Bio-venting stimulates the growth of pollution-eating microorganisms by pulling surface air down through contaminated soil. The ground surface is covered with plastic sheeting, and a vacum pump installed in a well below the ground pulls the surface air down.
Fruitvale’s solution is Bioremediation. What is bioremediation? Well, bioremediation is the use of living microorganisms to break down unsafe substances in the earth to safe substances. There are two different ways of carrying out bioremediation. One way is taking out all the hazardous material and injecting the microorganisms, not on the contaminated site. The second way has the microorganisms be put in the hazardous material on the contaminated site, and both are equally effective. Why should we choose bioremediation?
Many consumable goods contain substances that can pollute the environment after they are discarded. When these items are buried in landfills, chemicals can seep into the soil and contaminate underground water sources. When they are burned in incinerators, they can release harmful pollutants into the air.
What is soil? “Soil is a complex mixture of eroded rock, mineral nutrients, decaying organic matter, water, air, and billions of living organisms, most of them microscopic decomposers.” (Miller and Spoolman, 211). As stated, soil is made when a mixture of items such as eroded rock and mineral nutrients come together. Soil is used in a plethora of ways. Soil is where many of the nutrients plants need to grow comes from, soil purifies water, and even absorbs carbon dioxide from the atmosphere to be stored as carbon compounds (Miller and Spoolman, 211). Scientists study soil to develop a better understanding how this crucial factor in human’s survival functions and how to make sure humans don’t waste this precious resource (Miller and Spoolman, 211).
There are several types of treatment methods present but biological treatment methods have gained much traction in the recent years due to their low operation costs, comparatively benign effects on the environment and their ease of handling and maintenance. Biological wastewater treatment methods can be subcategorized into dispersed growth systems and attached growth systems. Biofilms fall under the latter category (Sehar & Naz, 2016)
Activate sludge system: Using natural biological such bacteria in which they help to remove contaminant.
One sustainable solution that has been proposed by the scientific community is bioremediation. Bioremediation is the application of microorganisms or biological enzymes to treat or remove contaminants. (“In Situ Bioremediation,” para. 1) Bioremediation is a lower cost and more effective option than removing contaminated soil offsite as a preventative measure, before the contaminants reach groundwater. When contaminants reach ground water bioremediation is still an excellent option, but it takes a longer period of time to remove the contaminants. Bioremediation is a sustainable option because it uses naturally occurring microbes that degrade contaminants naturally. This is most evident in the Exxon Valdez spill, where bioremediation was applied and was a major factor in restoring the environment. One of the most beneficial aspects of bioremediation is that this solution is ready for use today. From the time that the microbes are applied to the contaminants it can take anywhere from 65 days to several hundred days. Factors that can influence the time it takes to render the contaminants ineffective are seasonal temperatures, which contaminants where spilled, and the depth and area of contamination. The cost of bioremediation is another appealing aspect to this option because the cost is relatively low. There is no construction cost and the machinery cost is low. The cost of aerobic
Petroleum hydrocarbons from oil spills threaten marine life worldwide. Animals become coated in the oil and ingest the contaminants while trying to clean themselves. The toxic effects of petroleum often result in death for much of the surrounding life. Bioremediation offers an efficient solution for cleaning up oil spills. The pollutants are biologically degraded by complete mineralization of the organic contaminants, turning the toxic waste into harmless products such as carbon dioxide, water, inorganic compounds, and cell protein (Das & Chandran, 2010). Although contaminants could be removed by physical means, this does not dispose of the dangerous petroleum hydrocarbons. Bioremediation can clean up our oceans without producing harmful byproducts in a relatively inexpensive way using minimal technology.
The emergence and increased popularity of biohacking/DIYbio will work to increase the acceptance of such
If there is no immediate threat then the contaminated area may just be isolated to prevent further spreading. The clean-up is considered successful once contamination levels are reduced to background levels or those found in uncontaminated soils. In reality this is difficult to obtain and the costs may be difficult to justify against the benefits, this has led to a greater focus on the reduction of risk to an acceptable level rather than background levels (Pierzynski and Sims et al., 2000, p. 379).
Now a day bioremediation is widely accepted technique in world in bioremediation process mainly use of organism, yeast, fungi to clean up the contaminated site
...d trash on the soil in order to keep the soil fresh. My interest would be like find a material to transform those waste or trash as a <>. By that mean, Farmers, instead of buying chemical products to damage the soil, they would use that possibility to keep the soil safe and sound and save money too. Therefore, in order to improve air quality in my community, those disciplines would be highly required. It will also be very good for the safety of the environment.
1) Sampling of the soil and Field study – Type of area to be treated and bio monitoring of the field to decide whether bioremediation is possible mainly by pre-treatment assessment.
Traditional methods for cleaning up contaminated sites such as dig and haul, pump and treat, soil venting, air sparging and others are generally harmful to habitats. Some methods strip the soil of vital nutrients and microorganisms, so nothing can grow on the site, even if it has been decontaminated. Typically these mechanical methods are also very expensive. Most of the remediation technologies that are currently in use are very expensive, relatively inefficient and generate a lot of waste, to be disposed of.
Also, when soil in and close production ranges turn out to be unclean due to dumping of excess material, such terrestrial cannot be used for farming processes. Pollution is also caused by iron and steel mills; zinc, lead, and copper smelters; municipal incinerators; oil refineries; cement plants; and nitric and sulphuric acid plants. Soil pollution is mostly due to elements in herbicides (wild plant killers) and pesticides (toxins which kill flies and other invertebrate mice). Litter is unused material put in public places such as streets, parks, picnic areas and near shops. The addition of waste intimidates the wellbeing of individuals in housing areas. Waste decays, heartens domestic rascals and goes urban places into unappealing, unclean and unhealthy areas to live in.( (Michael
Phase one in process of waste water treatment begins in the home, local businesses and community. Waste water from these buildings and surrounding areas travel through a pipe, or sewer which is sloped downward, and with the assistance of gravity, travels toward the waste water treatment plant. However, in larger communities or communities with unevenly leveled terrain, waste water cannot keep getting deeper to rely on gravity to transport the waste water and must pumped up by the assistance of a lift station so it may continue to travel to the water treatment plant. Once the waste water arrives at the waste water treatment plant, the first step is the removal of large debris such as diapers, underwear or other non-biological...