High concentrations of lead can have many negative effects on the human body. Lead is a neuro-behavioral toxin that can seriously affect development in children and the health of adults.9 This became the main problem among residents once the river water was changed. Shortly after the switch from the Detroit Water Authority over to the Flint Water System the residents voiced concerns regarding water color, taste, and odor, and various health complaints including skin rashes.3 Since the aging Flint water distribution system contains a high percentage of lead pipes and lead plumbing 3 the discoloration and foul odor should have been a clear indication that the Flint River water was chemically reacting with the pipes. Thus causing lead and other...
... middle of paper ...
...tential signs that residents were being exposed to lead.8
Other recent news has found that The environmental Protection Agency, who works to ensure the safety of people, had sufficient authority and information to issue an emergency order to protect residents of Flint, Michigan, from lead-contaminated water as early as June 2015-seven months before it declared an emergency.1 EPA officials claim they could not issue a state of emergency sooner than what they did because state officials prevented them from doing so. The EPA has acknowledged that they should have acted sooner than what they did and accepts that they made a mistake. To this day the Flint, Michigan water crisis is still occurring leaving residents to use bottled water for their everyday uses. As more information comes to light the cities residents are closer to getting the justice that they deserve.
Need Writing Help?
Get feedback on grammar, clarity, concision and logic instantly.Check your paper »
- Corrosion is the damage of a metal because of chemical reactions between it and the surrounding environment.”1 The rate of that damage is determined by both the type of metal and the environmental conditions, and most specifically gasses that are in contact with the metal.1 All metals can corrode but the speed of corrosion is different from a metal to another. Pure iron, corrode quickly while stainless steel which has iron and other alloys in its structure is slower to corrode and that’s why used more frequently.... [tags: Corrosion, Metal, Aluminium, Electrochemistry]
978 words (2.8 pages)
- Corrosion is a serious negative implication that occurs frequently in the most important structures in society such as buildings and bridges. There are several methods to reduce and eliminate corrosion and to prevent such structures from falling apart. However, the methods used in order to prevent corrosion also have negative feedback. Electroplating, or adding a stable non-reactive metal on unstable metals that can corrode, is a common method that is used in a great quantity. The nonstable metals and the electronic waste produced in this process have various negative feedback on the environment and on human health.... [tags: Human, Cadmium, Pollution, Corrosion]
873 words (2.5 pages)
- Corrosion refers to the natural destruction of a metal due to an electrochemical reaction with its surroundings. Generally, a redox reaction occurs between the metal and its environment which results in the formation of metal oxides, hydroxides or salts. Its ability to damage materials requires means to prevent or control its effects (Bell, 2017). The main types of corrosion prevention include sacrificial anode cathodic protection, impressed current cathodic protection, and corrosion inhibitors.... [tags: Anode, Corrosion, Cathodic protection, Zinc]
736 words (2.1 pages)
- Car Care Corrosion & Rust Inhibitors Buying Guide One of the most unpleasant realities of owning a car is corrosion. Besides the fact that rust can cause some serious damage to your car, it obviously is an eyesore. As a car owner, it is important to understand how rust forms on your car, which parts of the vehicle are more susceptible to corrosion, and the type of climate where corrosion is more likely to thrive. How Corrosion Is Formed Corrosion involves anodes, cathodes, and electrolytes — scientifically speaking.... [tags: Rust, Oxygen, Electrochemistry, Corrosion, Iron]
926 words (2.6 pages)
- The corrosion from NH4Cl salts is an important reason resulting in the failure of petroleum refining equipment made of mild steel, especially crude tower overhead system including tower top, overhead piping, and exchanger. The factors affecting the corrosion environment include surface roughness, dissolved oxygen, temperature, the concentration of NH4Cl, corrosion time, pH, and the partial pressure of CO2. The effects of these environment factors on the NH4Cl corrosion of carbon steel were investigated by the use of electrochemical impedance spectroscopy (EIS) and polarization measurements.... [tags: Corrosion, Steel, Electrochemistry, Oxygen]
1655 words (4.7 pages)
- Corrosion of mild steel in mineral acids represents a terrible waste of both resources and money [1,2]. Corrosion prevention systems favor the use of chemicals with low or zero environmental impacts. Application of organic molecules containing electronegative atoms (such as, N, S, P and O), unsaturated bonds, as well as aromatic rings as corrosion inhibitor has been most efficient and an economically affordable method to prevent corrosion [3,4]. For mild steel protection in different corrosive media, various substances such as dyes, surfactants, Schiff bases, and polymers have been extensively used as corrosion inhibitor [5–10].... [tags: Surfactant, Corrosion, Electrochemistry, Solution]
928 words (2.7 pages)
- Corrosion is the deterioration of a metal as a result of chemical reactions between it and the surrounding environment, it is also known as rust. Corrosion is a disease to metals. It occurs when a gas or liquid chemically attacks an exposed surface of a metal (Encyclopædia Britannica, 2016). All metals can be corroded. Pure Iron corrodes the fastest. Noble Metals rarely corrode because they are less reactive than most metals (Bell, 2017). There are 10 types of corrosion, General Attack Corrosion, Localized Corrosion, Galvanic Corrosion, Environmental Cracking, Flow-Assisted Corrosion (FAC), Intergranular corrosion, De-Alloying, Fretting corrosion, High-Temperature Corrosion.... [tags: Corrosion, Oxygen, Electrochemistry, Iron, Metal]
873 words (2.5 pages)
- INTRODUCTION: Passivity: Active metals under certain environment can become active. This is due to the formation of thin adhesive oxide film on the surface of the metal which acts as a protective barrier for corrosion. This layer is formed by corrosion where the byproduct is insoluble to a particular environment. The stable metal oxide layer acts as a physical barrier to the environment. For example aluminum is corrosive resistant due to passivating AL2O3. DETAILS AND ANALYSIS Now-a-days electronics are used extensively that were never thought few years back.... [tags: Corrosion, Aluminium, Electronics, Metal, Cathode]
1052 words (3 pages)
- Hypothesis: If the presence of salt dissolved in water is increased, then the rate of corrosion will increase. Aim: To compare the rates of corrosion of different nails by adding them to different samples of water, both salt and fresh, and then analysing the rate in which the nails corrode . Metals corrode via a process called redox reactions. Corrosion causes substantial costs to the economy as water pipes and buildings corrode very easily. On average $50 billion is spent annually in an attempt to prevent metals from corrosion.... [tags: Oxygen, Iron, Corrosion, Metal, Zinc, Oxide, Water]
1120 words (3.2 pages)
- 1 INTRODUCTION Corrosion is a natural process, from which a modified material will either break down into a more basic state or be broken down (Gundiler et al, 2000). The process causes undesirable traits in the product which may range from a change in appearance to failure of structures. The effect of corrosion as addressed by Ahmad (2006) costs many billions to governments, as an outcomeindustry has developed many ways to combat corrosion. Combating corrosion can be done though two methods, by design and by inhibition.... [tags: Research Analysis]
1244 words (3.6 pages)