BUILDING A HOUSE

654 Words2 Pages

Building A House

The process of building a house is a very complex and difficult task. In the following paragraphs, I will be explaining the many different steps that are required to build a house.
The first thing in building a house is selecting a lot and lot preparation. The land has to be cleared of trees and brush and graded to ensure a level building area. This process is usually called excavating and grading. This is usually a very fast process but can be costly depending on the job.
Also the land has to perk which means the land is not too wet and is safe for a structure and allows a septic tank to be installed that will function properly.
The next step is to have the land surveyed. When the land is surveyed you will find out where the property lines are located and also get the footer laid out and ready to dig. After the footing is prepared and poured full of concrete, the next step is to lay the foundation. Materials used are usually brick or block. The foundation has to meet certain codes which are set by the county. The inspector will have to inspect the foundation before the building process can proceed. After the foundation has passed inspection, the next step for the house is to frame.
The framing process is probably the fastest part of building a house. A good framing crew can frame an average size house in just a couple of days. The framing of the house consists of the floor system, walls, and roof system. The framing is th...

More about BUILDING A HOUSE

Open Document