Do you like colors? What if I asked you to make a single sharpie? Would you be able to complete that simple task without instructions? As hard as it may seem, it is actually quite simple. The process is a few simple tasks added up to a big task. Sharpie parts are first made in the molding department of a factory. These parts are then sent to the assembly department. In assembly, the logo and names are pressed onto the tubes and the pieces are put together. After assembly, they move to packaging. There, the sharpies are put in packages and shipped out as finished product. Personally, I’ve worked in all three departments; and each has their pros and cons. Molding is the easiest of them all and you get the longest breaks. Although it is the easiest, it is also the hottest and requires the most walking. Also in molding it is easy to get a red tag later in the night when the tiredness kicks in. Assembly is simple you fix broken machines and make sure ink is refilled for the sharpie logos on the sharpies. The downside to assembly is that you must be at work 15 minutes before everyone else and you get minimal socializing …show more content…
The process begins when raw plastic is brought to the plant. This raw plastic is running through certain machines depending on the part ordered. The machine takes raw plastic and molds the plastic into the ordered part. Dye is then added if needed to change the color. One person can run up to 13 machines at a time depending on what machines are running. Every two hours quality checks are put in place. To do a quality check an employee takes a shot of product and searches for defective parts. If a defective part is found the machine gets shut down and maintenance fixes the problem. If a defective product is missed on a quality check a red tag is given. If an employee is given a red tag they must attend a red tag meeting. Furthermore, if an employee receives three red tags the employee is laid
different colored water-soluble marker pens (Vis a Vis pens and Crayola water soluble work well. Be sure that it is water soluble. Be sure to test any green, water soluble inks that you have.)
The first step is to print three pages to achieve a complete set. These can be printed on any material and glued to a thin cardboard or some other construction
However, stencils are useful tools, and many craftsmen create their own. A craftsman may design a stencil for the line of items he sells. Now he can freely recreate the...
Epsen Hillmer needs to take advantage of better technologies in the label printing industry. Currently the company provides litho, flexo, letterpress, silkscreen, and combination plate printing with varnish and lamination capabilities to meet the needs of their current custom label customer base. Litho printed labels are found on juice bottles such as Apple Tree and Langer's Juices. Flexo printing is often used to print simple labels such as meat, bakery, and deli merchandising labels; EHG stocks many of these labels. Letterpress is used in a great deal of four-color process work (4CP), this would include Campbell's Foodservice labels, Dannon Whips labels, and Seminis Seed labels. Silkscreen is often used on shampoo products, such as Alberto-Culver's labels, to provide a pop to the label. These are all plate printing methods, which are often used to reduce overall costs for the customer; however, the plates wear out and break and need to be maintained for best print capabilities. When the plates deteriorate they can be greater color variation in the labels, which makes customers unhappy because these labels are their product image. The steps that need to be taken to prepare a plate job for print can take a great deal of time, which can be detrimental to Epsen Hillmer Graphics because many of the customers work in just-in-time (JIT) and don't allow for a lead time of 3-4 weeks before their labels are even shipped.
Career Education Advisor states that welding is relatively dangerous work, done in some potentially hazardous environments. Welders work with electrical currents, large machinery, and heavy parts in conditions that include factories and construction sites. Management-level welders spend time on work sites as well as in the office (Career Education Advisor). Finally, every occupation has advantages
The first thing to consider is the process of cleaning and coating of the boards. This particular process involves the set-up of the machines, the loading of the boards, and the actual cleaning and coating of the said boards by the machines.
Writing is like getting your nails done because it is a process and done in steps. Most would never think to compare writing and nails. They are two completely different things and done two completely different ways. I don’t believe they are that much different. They may not be physically alike, but they share similar ways they get done.
To end this career research assignment, I will say welding is the prefered job of the two. Welding is about creating physical things to help the public progress further into the future. Welding is about making it possible to get from point A to B in a much faster way. I am really looking forward to helping the world with this job, and using all the new technology that keeps coming out for this career. Taking Welding 1, 2, and metal fabrication are the reasons I want to become a welder. Just the fact of melting metals, and watching them connect to make structures is enough to make anybody wanna be a welder.
This quality assurance system does not slow down production, but instead allows quality controllers to evaluate and determine quality needs or process improvements. Having appropriate testing and performance evaluations of the production cycle ensures that a high quality product is delivered to consumers and minimizes the risk of defects. Samsung will focus on improving their quality assurance process in light of the issues they had with the Note 7 battery and implement these quality controls as part of the production cycle of this new
Secondly, from years of quality control practice the firm established a well-know quality control procedure, "the Method". It has great value to the company in that it includes detail best practices for the production procedures which guarantees and improves the quality of the products. It serves as an efficient decision measure tool and a great training material.
Toyota’s core competencies seem simplistic, yet they are very powerful. There are two in which they focus on which is continuous improvement and respect for people. These core competencies are a part of their production system, better known as the Toyota Production System (TPS). The TPS is based on the philosophy “completely eliminating all waste”. Excess inventory, defective products, and unnecessary processing steps are all inclusive when discussing excessive waste, which eventually negatively effects the corporation as a whole. In 1924, Sakichi Toyoda created the Toyoda Automatic Loom, which improved productivity and work efficiency by eliminating wasteful practices and defective products. Kiichiro Toyoda believed that “the ideal conditions for creating things are more successful when machines, facilities, and people work together to add value without generating any waste.” (The orgin of the toyota production system,
These procedures and practices are used both by GM and by their vendors. The policies vary from layered inspections, statistics, process failure modes, effects analysis and control plans (Drew, 2011). All quality measures produce a graded system of quality management utilizing quality tools. An example of quality control test is that of speedy response wherever dilemmas are resolved quickly and immediately throughout visual management. Individuals responsible for specific tasks are kept accountable for some corrective actions that may subsist. What General Motors did was ignore this quality measurement when it was dealing with the problems of the Chevrolet
Everyone has heard a cashier one time or another mumble, “Paper or plastic?” as he put their groceries in a bag, but do shoppers know the effects of each vessel in which they carry their comestibles? There are many issues and benefits to both paper and plastic. The making and recycling of both paper and plastic bags can harm the environment. One must also look at the costs of making each bag. The convenience of each is also something to look at. Many people jump to conclusion that paper bags are better for the environment without knowing the facts. Since plastic bags are preferred by customers and plastic bags actually do not hurt the environment as much as paper ones do, consumers should feel at ease when choosing plastic.
Third Stage - The plastics are then recycled by Attero Group’s innovative plastics recycling process which further processes the plastic.
type of plastic and by color. The first step is the most important one in the process.