Occupational Health and Safety
Safety Regulations
DB Schenker had create their rules and regulation for all of their employees to follow. With this rules and regulations, employee will be more discipline and focus on completing their job. This rules and regulations also can create healthy and not stressful environment. Below are rules and regulation of the company.
Safety regulations that been done by DB Schenker is base on OSHA 1994. There are two section that been highlight to the safety regulation which are
a. Section 15. General duties of employers and self-employed persons to their employees
• It shall be the duty of every employer and every self-employed person to ensure, so far as is practicable, the safety, health and
…show more content…
• A person who contravenes the provisions of this section shall be guilty of an offence and shall, on conviction, be liable to a fine not exceeding one thousand ringgit or to imprisonment for a term not exceeding three months or to both.
Training Provided
Company SOP
Every company have its own company SOP. SOP is stand for Standard Operating Procedure. Standard Operating Procedure is established procedure to be followed in carrying out a given operation or in a given situation. In Air Freight Department, SOP been differentiate into two which are Import Procedure and Export Procedure.
SOP in Import
The purpose of SOP in import is to describe the handling for Airfreight Import Operation to ensure that customer orders are correctly processed until delivery of goods to specified destination and time frame. This SOP applies to Airfreight Import Transactions and applicable to damages observed or encountered during inspection at MAS cargo upon arrival or while at Schenker Transit warehouse.
a. Definition
• AWB - Airway Bill
• MAS – Malaysian Airline
…show more content…
There are a program named “Climate Protection Program 2020” had been established in order to reduce its carbon emissions by 20% from 2006 to 2020 for all type of transportation which are on land, sea and in the air.
The program that been established includes the logistics areas and freight forwarding areas, as well stationary processes. The major contribution will be made by linking various modes of transport, by new and energy-efficient vehicles. They also will like to achieve an even greater capacity utilization rate for the transport and in fuel-efficient driving methods used by specially train drivers and trained truck. With this initiative, carbon emissions will be reduced and will keep the environment clean and safe.
DB Schenker is on its way to becoming the leading provider of Green Logistics services. DB Schenker is realizing enormous possibilities of carbon savings above all by intelligently linking together the various mode of transportation. Carbon reduction can also be achieved by:
• Increasing energy efficiency for the combats global warming.
• Offering new green solutions for conserve the environment.
• Reducing dependency on fossil fuels by expanding the use of renewable.
As leaders, enterprises give them authority and require them to act responsibly to create a hospitable work environment by guiding others in practicing mutual respect. Overt or implicit bias in the workplace undermines potential. People of varying ages, genders, ethnicities and regions all have valuable contributions to offer, and as the corporate world draws from a global talent pool, fostering understanding is increasing in importance even for small organizations.
Janet’s responsibility is to be in the know of all the policies. procedures, and processes. The manager is responsible for coordinating with the OHSA team and setting up training and meetings to ensure that all departments are in compliance with the standards. As part of our training we have annual testing that involves taking a series of computerized tests that addresses staff safety issues. Twice a year there are mock visit that are conducted by the OHSA team to ensure that all employees are on the same page. The feedback is provided through reports t...
...lothing and equipments in the industry. These will greatly ensure the safety of the employees and hence minimize the injuries. Use of the administrative control and work practices will also lead to the production of quality products safe for consumption (OSHA Quick take, 2010).
Greer, M. E. (2001, October). 90 Years of Progress in Safety. Professional Safety, 46(10), 20-25. Retrieved April 22, 2014, from http://search.ebscohost.com/login.aspx?direct=true&db=bth&AN=5367632&site=ehost-live&scope=site
I have done an extensive search on the internet finding much of your needed information for the upcoming OSHA audit. You should find it helpful in answering all of the questions you had. I have attached the first page of every website in case you would like to check them out in more detail.
OSHA regulations give full disclosure to employees about workplace hazards. Businesses that produce or import chemicals of any sort must review the dangers associated with these chemicals and have them labeled accordingly. They must also prepare material safety data sheets to go with any delivered chemicals. This will describe technical information as well as hazardous effects from exposure and the appropriate protective measures. Any employees wh...
Thereby, since we understand that organizational strategies are needed to eliminate on the job discrimination, we also must understand that defeating it can be very difficult and can cause conflict amongst everyone. We all have some form of bias, but within the DOJJ one would think that these bias whatever they maybe would remain off the job, but that can only happen in a perfect world. So, since our world in not perfect, we need to develop some form of strategy to avoid this type of conflict on the job. As we examine this issue we found out that “discrimination often occurs when one culture does not understand another, therefore, organizations need to spend time training staff in cultural diversity and strategies for effective communication” (“Best practice in”,
1.4 – State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:
In this assignment I am going to describe three different Health and Safety legislations that promote the safety of individuals within a health and social care setting.
Section 8 of the Safety, Health and Welfare at Work Act (2005) puts the onus on the employer to ensure systems of work that are planned, organised, performed, maintained and revised as appropriate so as to be, so far as is reasonably practicable, safe and without risk to health. Section 19 of the Act requires the employer to conduct a risk assessment of work activities and Schedule 3 of the Act provides the general principles of prevention to ensure the safety of employees in the workplace.
This Act of Parliament is the core part of UK health and safety law. It places a responsibility on all bosses and managers to make sure, so far as is reasonably practicable, the health, safety and well-being at work of all their staff and workers.
In the workplace, it is common to encounter individuals of different cultures, ethnicities, and genders. This diversity can either lead to an introduction of new work methods, or it can lead to conflict between coworkers. In order to avoid conflict, and have all employees work as a cohesive team, managers must educate themselves, and their employees on the topic of cultural diversity. In order for your practices to be considered effective, you must not only respect and recognize an employee’s diversity, you must use their difference to benefit them.
1. Safe: avoiding injuries to patients from care that is intended to help them, reducing medical errors.
In the early 1900s industrial accidents were commonplace in this country; for example, in 1907 over 3,200 people were killed in mining accidents. At this time legislation and public opinion all favored management. There were few protections for the worker's safety. Today's industrial employees are better off than their colleagues in the past. Their chances of being killed in an industrial accident are less than half of that of their predecessors of 60 years ago. According to National safety Council (NSC), the current death rate from work-related injuries is approximately 4 per 100,000, or less than a third of the rate of 50 years ago. Improvements in safety up to now have been the result of pressure for legislation to promote health and safety, the steadily increasing cost associated with accidents and injuries, and the professionalization of safety as an occupation. When the industrial sector began to grow in the United States, hazardous working conditions were commonplace. Following the Civil War, the seeds of the safety movement were sown in this country. Factory inspection was introduced in Massachusetts in 1867. In 1868 the first barrier safeguard was patented. In 1869 the Pennsylvania legislature passed a mine safety law requiring two exits from all mines. The Bureau of Labor Statistics (BLS) was established in 1869 to study industrial accidents and report pertinent information about hose accidents. The following decade saw little progress in the safety movement until 1877, when the Massachusetts legislature passed a law requiring safeguards for hazardous machinery. In 1877 the Employers' Liability Law was passed. In 1892, the first safety program was established in a steel plant in Illinois, in response to the explosion of a flywheel in that company.
Ensuring the health and safety of employees is of primary importance to the Organization. Organization is committed to maintaining safe facilities, sponsoring appropriate training programs, and providing necessary safety equipment. In addition, Administration and staff shall cooperatively develop appropriate procedures and regulations for ensuring employees' health and safety, with special emphasis on the handling of potentially hazardous equipment or substances and for investigating and reporting any accidents and mishaps. All newly employed staff shall be required to comply with the physical examination. Every employee must provide annually, at a minimum, an updated health history of current health problems.