Whether zipping along a winding trail, flying through the open flats, or powering up a steep hill snowmachines and the rider need to use physics to stay in control of the machine and themselves. The main compenents are the track, engine, skis and riding. Snowmachine tracks are essential to making a snowmachine move. Ever since snowmachines first originated in the late 50's designers have been finding ways to improve traction in a variety of conditions. Some of these conditions are driving on groomed trails, not groomed trails, overflow, and deep snow. The very first snowmachines had tracks with very bad traction. But you must realize that they weren't driving in the same conditions snowmachines of today can handle. Old machines were limited to readily used trails and very little powder. The tracks used on the old machines looked like the one shown in the picture below. The traction, the little raised bits of rubber, was minimal and the tracks weren't very economical either. The first attempts at making a track was using steel, which was too heavy, and rubber, which was to flexible and brittle at cold temperatures. Eventually manufacturers found the key ingredients. Kevlar tracks with imbedded nylon strands to reinforce and improve strength. A kevlar track is now the standard in today's snowmachines. Another key ingredient to the track is the paddles. Paddles are the pieces coming off of the track itself, a picture these paddles is shown below. This is what provides the traction for the snowmachine to move. In today's market these paddles come in sizes ranging from 1 inch to 3 inches. The saying "bigger is better" does not hold true for these paddles though. When the paddles get to big the rotating mass actually bogs the machine down and reduces performance. Polaris Industries have found, through the use of physics and other tests, that the most efficient paddle length is 2.4 inches. This length gives the most grip in deep snow while still being semi-economical on trails. Snowmachine engines come in two types, two-stroke and four-stroke. Two stroke engines are simpler, lighter, and cheaper to manufacture then four-stroke engines, "plus two-stroke engines also have the potential to pack about twice the power into the same space because there are twice as many power strokes per revolution than in four-strokes". There are other advantages two-stroke engines have which include not having valves which lowers weight and eases construction.
Another type of wax is applied to the "kicker". The kicker is the area under the bindings. In other words the kicker is the area where most of the gravitational force of the skier is applied. Skiers apply a type of wax to the kicker that will cause the friction coefficient to increase. This allows skiers to be able to push off and ski uphill.
To start of we all know that driving in Winter all drivers experience low visibility which causes all drivers to take it slower than usual. Before thinking about driving in Winter, you need to make sure you know how to handle snowy and icy roads before getting behind the wheel. All it takes is the smallest patch of ice or snow to cause you to skid of the road, which could cause life threatning injuries
weight depending on the size and height of the rider. The snowboard is measured in inches. Children ride between a 38"-43". Women usually ride between 45"-53. For men, the sizes can run from 55"-65".
Snowmobiling in today’s world is far more exciting and dangerous than it used to be in the 20th century. There are many types of snowmobiles and different capabilities for every make, model, and year. Every single snowmobile is different in its own way. Many snowmobiles have evolved and developed into amazing machines that are a great source of entertainment.
In snowboard as in any other sport the athlete has to be thinking at all times, analyzing the situation that surrounds you, make split decisions, and even perform quick calculations in your head.
A steel ring (7) serves two purposes: it protects the sides of the snowboard and puts maximum force into the snow for optimum maneuverability.
There are a few different companies that produce kits to to convert a dirt bike into a snowbike but Arctic Cat will be the first company to produce their very own complete snowbike. The Arctic Cat SVX 450 will be powered by a single cylinder 4-stroke engine with electronic fuel injection. The engineering and design of the the SVX 450 is a collaboration of Arctic Cat and Camso. Arctic Cat is hoping to open the market to dirt bike enthusiasts. The snowbike will not have an option kit that will be able to convert into a dirt. Arctic Cat knows that the snowbike needs to fairly cheap to pull drivers to it. Snowmobile.com sugeests that the price of the SVX 450 needs to be cheaper than the average cost of a new dirt bike and snowbike
First, ski wax can help in a variety of ways while a person is skiing. “Wax is applied to base of skis to further reduce friction and make skis slide more easily.” ("WHY SKIS SLIDE”). Wax is also used to prevent the ski bases from drying out (“Ironing Suggestion & Hints”). Next, Friction is the force that causes an object to slow down or affect the effort for the object to move across another surface (“Types of Forces”). Without friction an object will keep traveling in the same direction forever. Friction causes resistance between two surfaces. Newton’s first law states, an object in motion will stay in motion, an object in rest will stay in rest until another force acts upon it. Friction is that force that slows a skier down, without it they will never come to a stop. Furthermore, alpine skiing is a passion to many around the world. Furthermore, “Alpine skiing is the sport of sliding down snow-covered hills on skis with fixed-heel bindings.” (“What Is Skiing”). It is also commonly known as downhill skiing, although that also incorporates different styles (“What Is Skiing”). There are many different styles of downhill skiing, many people ski for the enjoyment but some may participate in competitive ski races. Additionally, velocity is distance divided by time, in other words, how fast an object travels per second, minute, hour, etc. On the other hand
To begin with, the landing of the snow on the road caused many damages to them. This was because the levels on which the roads were raised were in different proportions. This, therefore, prevented lack of flow to be experienced on the roads. Moreover, the cracks that were observed on the roads came about because of the difference in the temperatures of the country.
Benjamin Holt of Holt Manufacturing figured that using an old trick of pouting planks before the wheel would improve cross-country ability. By doing so, it provides solid plane for better traction and lower pressure on the ground since size of the plank is larger then of the wheel.
Blizzards are dangerous winter storms that are a combination of blowing snow and wind. Sometimes severe cold temperatures and heavy snow fall occur but they are not needed for a blizzard to occur. While a blizzard is going on there can be very high, strong winds that can pick up snow that had already fell on the ground and result in a ground blizzard. The National Weather Services considers a blizzard a large storm with large amounts of snow or blowing snow with winds up to 35 miles per hour and visibilities of less than a quarter of a mile for an extended period of time. Usually there will be a “Blizzard Warning” sent out to everyone near the blizzard that it is coming and to get the nearest shelter and stay off the roads. Blizzards are very
Lots of benefits of commuting by bike become more noticeable in winter! Staying healthy while avoiding crowded gyms, no weather-related traffic backups without scratching snow and ice off your vehicle. When driving in chilly and adverse weather, layers are the friend, particularly an outermost layer composed of a windproof and waterproof barrier. Maintaining the cold wind to cut into your skin will result in a more pleasing experience. Though your palms and mind lose heat, keeping your torso warm with a foundation and secondary layer under a wind vest or coat allows your extremities to remain warm longer. Wool socks with their wicking and heating abilities keep your legs comfortable.
In cold and snowy areas, people have been trying to move faster without having snow up to their waists. The Norse were having these problems because of their village placements in the mountains. About 6000 years ago, the Norse discovered that you sink less in snow when on top of some object with a large surface area. They decided to put one long wooden board on each foot and slide down the hill.
Skiing is a winter sport that millions of people around the world enjoy, it has been changing since its origins. Skiing has a long history that has origins dating back longer than a majority of sports that still exist today even though its original purpose wasn’t for sport. Skiing has evolved from its origins. The technology of the skis and safety equipment are not only different, but are actually existent making the sport safer. In addition, the competitive aspects have changed from when it was first transformed into a sport to what it is today.
They wanted a light, simple machine that could be started easily and that would negotiate particularly muddy paddocks and steep hillsides in all weathers. A range of bikes were tried by a number of farmers and they came to use a mild-off-road machine that could carry a good load (mainly a tray for their dogs, instead of a rear seat) that was easy to mount, start and ride with heavy rainwear. Large profile low-pressure tyres with knobby tread were found best for grass, mud and rocky tracks. Ultimately Japanese manufacturers developed a range of specialized bikes—about the time that the farmers came to use ATVs