ATM Networks
Traditional local area networks, such as Ethernet and Token Ring, use a connectionless or unreliable approach when sending information across the network. Each client is connected to the network by an adapter card, which has a driver, and above that driver is a protocol driver, such as TCP/IP. The protocol driver bundles information into frames of varying size, and gives each bundle an appropriate header. Then, when the wire is available, the data packets are shipped off to be individually routed through the maze of hardware and software. Each packet in a series of packets could conceivably take a different route to reach the same destination. Traditional LAN technologies do not guarantee that data will arrive on time or in the proper order. Ethernet and Token Ring can detect errors, but they provide no service guarantees and are not responsible for recovery from missing or corrupted data packets.
Because they are joined by a common medium, each station on the traditional LAN sees the packets of data put on the wire by each of the others, regardless of whether the packet is passed sequentially from one station to the next (as in a ring topology) or broadcast to all stations simultaneously (as with Ethernet). Each station has an adapter card, which processes the packet and examines the destination address. If the address applies to that machine, the adapter does a hardware interrupt and accepts the packet.
Because a traditional LAN is connectionless, it cannot provide guarantees or similar features. For example, it cannot determine the status of the target machine. It cannot ensure that bandwidth will be available throughout the transmission. Unanticipated bottlenecks are common, which can hinder a traditional LAN’s ability to support time-sensitive applications such as video-on-demand or voice traffic. Traditional LANs can use upper-level protocol drivers are to do such things as verify packet arrival (retransmitting, if necessary), partition big messages into smaller ones, use time stamps for synchronization, and so forth. However, these services add time to the transmission, and none of them provide end-to-end quality of service guarantees.
ATM, on the other hand, is connection-oriented. An ATM end point establishes a path (a virtual circuit, or VC) to the destination end point prior to sending any data out on the network. It then sends a series of same-size packets (called cells) along this path towards the destination. Note that while establishing the connection, the ATM end point also negotiates a quality of service (QoS) contract for the transmission.
... access to what and in which sequence. The router connects the LAN to other networks, which could be the Internet or another corporate network so that the LAN can exchange information with networks external to it. The most common LAN operating systems are Windows, Linux, and Novell. Each of these network operating systems supports TCP/IP as their default networking protocol. Ethernet is the dominant LAN standard at the physical network level, specifying the physical medium to carry signals between computers, access control rules, and a standardized set of bits used to carry data over the system. Originally, Ethernet supported a data transfer rate of 10 megabits per second (Mbps). Newer versions, such as Fast Ethernet and Gigabit Ethernet, support data transfer rates of 100 Mbps and 1 gigabits per second (Gbps), respectively, and are used in network backbones.
Ethernet is often built into hardware devices such as network interface controllers, to allow the sending and receiving of data packets to that piece of hardware. Ethernet can be used to create a wired local area network, which can subsequently communicate with other LAN’s, ad infinium, which in turn creates the internet. Ethernet uses a system called CSMA/CD or Carrier Sense Multiple Access with Collision Detection. This system is able to deal with collisions which happen when two messages are sent at the same time. When two nodes on a network attempt to exchange data at the same time, they collide and create an error. When this happens, all nodes involved are notified. The Ethernet protocol will then set a random time interval, after which the node will re-attempt the transmission. This will be done until the message is successfully sent. Just as the hypertext transfer protocol and transmission control protocols will be used every single time a student at PCO’s learning centre accesses internet, so too is the ethernet protocol. This, however, will be done in a slightly different way. As the students will be using Wi-Fi to connect to the modem, ethernet will not be used. In saying this, ethernet will be used to connect to the NAS and the printer. For example, if two students want to print something, and they do so at the exact same time, the messages will collide. As the printer is connected through ethernet, the printer, and two computers will be notified of the collision. The ethernet protocol will then set a random time interval, and the printing request will be sent again at different times for each computer. Although this is a reasonably complex process, in real time, the students will have no idea this is happening, and the printer will print both students documents like nothing has
Twitter is an online social networking service that has grown to a global scale. In 2006, it was created for people to be able to share short blurbs of information with each other, and it has done its job quite well. However, like most technologies, there comes consequences, good and bad, that many didn’t intend, or expect, to happen. Twitter has greatly affected the world, and society as a whole, as it affects everything from the news to even how we think.
ATM is geared toward high speed voice and video transmission, much like a telephone network. It uses a cell-switching and multiplexing technology. The data (this refers to data, voice and video) is transferred between two points on a dedicated circuit in 53 byte cells. Each cell is the exact same size, no matter what data is being sent. The cells consist of 5 bits of header information and 48 bits of actual data. Using a smaller, consistent cell size means there's less delay between when each cell processes at the other end. Using dedicated circuits via virtual circuits ensures there is no interruption in the data transfer. This is extremely important to voice and video transmissions, because they are highly intolerant to data delays. This improves the Quality of Service (QoS) and speed of transfer, which can be between 25 Mbps to 622 Mbps.
It just doesn't get much simpler than the physical bus topology when it comes to connecting nodes on a Local Area Network (LAN). The most common implementation of a linear bus topology is IEEE 802.3 Ethernet. All devices in a bus topology are connected to a single cable called the bus, backbone, or ether. The transmission medium has a physical beginning and an end. All connections must be terminated with a resistor to keep data transmissions from being mistaken as network traffic. The terminating resistor must match the impedance of the cable.
First of all, twitter has high open degree and the median between the public and twitter is liberalised. Twitter is an open and we media platform. Users can register online to be a member of twitter life and mobile phone, tablet, laptop, any networking devices can be the devices to receive and publish twitter message which make twitter more portable. Precisely because the low barriers and portability, more and more people attracted by twitter, and the audience has grown. on twitter everyone can be the news publisher, everyone is broadcaster.
TCP/IP is a network standard that defines how data is sent throughout the network. TCP/IP consists of two different layers. Transmission Control Protocol is the higher layer and manages the assembling of a message or file into smaller packets. After forming the packets, the device will transmit them across the Internet and to be received by a device that is also using the TCP protocol. The device then reassembles the packets into the original message and presents the data to the user. The lower layer is Internet Protocol and handles the...
5 Pittman, J. K et al. (2011). The potential of sustainable algal biofuel production using wastewater resources. Bioresource Tech, 102(1), 17-25.
Mertz, L., The Next Generation of Exoskeletons: Lighter, Cheaper Devices Are in the Works. Pulse, IEEE, 2012. 3(4): p. 56-61.
Nowadays, people around the world are demanding for more sustainable energy source other conventional fuels such as coal, natural gas and fossil fuel for their daily activities. However, conventional fuels are categorized into a non-renewable energy source. Thus, to overcome this problem, an alternative fuel called as biofuel is used to substitute the conventional fuels. Moreover, biofuel can grow in interest in many developing countries by using “modern” use of biomass to produce the clean liquid fuels. The uses of biomass as a biofuel feedstock may offer new employment prospects for people that stay in that region. The biomass that commonly been used in biofuel is called as algae biofuel or oilgae, in which the oil that does not consist of toxic or sulfur contents in it (Demirbas and Fatih Demirbas, 2011).
By the uses Twitter, Amazon understands how Social Media is not just a marketing tool but can also be integrated directly into e-commerce. Amazon has invested in allowing users to send items to their shopping basket directly from Twitterby responding to product tweets with the hashtag #AmazonCart. Moreover, Amazon had a dominant grip on both B2C and B2B, which reflects on their Amazon Web Services (AWS) Twitter
outlets. In the article, ‘Twitter Takes a Trip to College’ by Zach Miners, David Parry, a professor
LANs systems can be defined and connected in many different ways. This is the reason for the standardization for every one can have a common ground to start from. “The LANs described Herein are distinguished from other types of data networks in that they are optimized for a moderate size geographic area such as a single office building, warehouse, or a campus. The IEEE 802 LAN is a shared medium peer-to-peer communications network that broadcasts information for all stations to receive. As a consequence, it does not inherently provide privacy. The LAN enables stations to communicate directly using a common physical medium on a point-to-point basis without any intermediate switching node being required. There is always need for an access sublayer in order to arbitrate to access to the shared medium. The network is generally owned, used, and operated by a single organization. This is in contrast to Wide Area Networks (WANs) that interconnect communication facilities in different parts of a country or are used as a public utility. These LANs are also different from networks, such as backplane buses, that are optimized for the interconnection of devices on a desk top or components within a single piece of equipment.”(IEEE 802 Standard 1990) That is the standard definition for LANs by Institute of Electrical and Electronics Engineer committee 802. They are the committee used to set the standard in workmanship and operations for technicians that set-up and perform maintenance on LANs systems. And through all the technical words what they are trying to say is a LAN is a small area network that distributes information among computer in a small work environment unlike WANs that distribute information across global areas.
Coal and crude oil are non-renewable resources. They take an extreme amount of time to form and due to that, they cannot be replaced once they have all been used up. However, when it comes to the biofuels, they are produced from plant material and are renewable. There are two types of biofuels: Biodiesel, which is made from rapeseed oil and other plant oils and is used in diesel-powered vehicles without needing any modifications to the engine, and Bioethanol, which is a liquid fuel that burns quite well and is made by fermenting sugars from sugar cane, wheat and other plants. In this essay, whether or not biofuels are becoming an increasingly important alternative to traditional forms of energy under environmental and economic benefits and
Internet Protocol version 4 is the current standard “IP” protocol used with Transmission Control Protocol/Internet Protocol (TCP/IP), which is the protocol for Internet addressing. Like the Open System Interconnection (OSI) model, TCP/IP has its own model. The TCP/IP network model represents reality in the world, whereas the OSI model represents an ideal. The TCP/IP network model has four basic layers. The first layer, Network interface layer, deals with all physical components of network connectivity between the network and the IP protocol. Next the Internet layer contains all functionality that manages the movement of data between two network devices over a routed network. Then the Transport layer manages the flow of traffic between two hosts or devices, ensuring that data arrives at the application on the host for which it is targeted. And last, the Application layer acts as final endpoints at either end of a communication session between two network hosts (Tetz).