Micro system designs - that feature sensing technology, miniature radio transceivers, low power consumption and tiny volumes are now gaining more attentions in both commercial and research communities. By utilizing the energy harvested from the environment, the device lifetime can be extended to virtual infinity as long as the energy source exists. Harvested energy is either stored in energy buffer for later use or directly used
to power computation circuit. Here, the environmental energy can be from solar, vibration, heat or radioactive decay of matters, while solar energy is most popular because of its ubiquitous spreading, high power density, etc. Low power consumption is one of the design criteria for modern VLSI design because of the popularity of portable devices equipped with wireless communication capability. Most of the current effort of low power design is to reduce the power consumption of the applications subject to a performance requirement under a fixed energy source and constant supply voltage environment.
Previous researches have shown that the output power from the PV cells is greatly affected by the input lighting power and the output load. And lots of works have been done in order to maximize the PV cells power output. The PV cells under the strong sunlight were directly connected to a handheld device. By operating the device at different modes, the load is matched with lighting variations and the energy extracted from the PV cells is maximized. A DC-DC converter was connected to the PV cells. By adjusting the converter switching duty cycle, the PV load was changed and its maximum power point was tracked.
For lots of PV applications such as environment monitoring or wireless sensing ...
... middle of paper ...
3.S. Bandyopadhyay and A. P. Chandrakasan, “Platform architecture for solar, thermal, and vibration energy combining with MPPT and single inductor,” IEEE J. Solid-State Circuits, vol. 47, no. 9, pp. 2199–2215, Sep. 2012.
4. S. H. Jung, N. S. Jung, J. T. Hwang, and G. H. Cho, “An integrated CMOS DC-DC converter for battery-operated systems,” in Proc. IEEE PESC, Aug. 1999, pp. 43–47.
5. D. Ma, W. H. Ki, C. Y. Tsui, and P. K. T. Mok, “Single-inductor multiple-output switching converters with time-multiplexing control in discontinuous conduction mode,” IEEE J. Solid-State Circuits, vol. 38, no. 1, pp. 89–100, Jan. 2003.
6. Y. H. Lam, W. H. Ki, C. Y. Tsui, and P. K. T. Mok, “Singleinductor dual-input dual-output switching converter for integrated battery charging and power regulation,” in Proc. IEEE Int. Symp. Circuits Syst., May 2003, pp. III-447–III-450.
Need Writing Help?
Get feedback on grammar, clarity, concision and logic instantly.Check your paper »
- Output, input, Storage and Speed of the Computer Printed questionnaires Intelligent Character Recognition (ICR) would be the best choice. Its the ICR technology that allows data capture software to automatically to, read information from all types of documents - even handwritten ones. Telephone survey-voice recognition is best because a voice input device can be programmed to distinguish answers spoken into the receiver allowing it to all be completed by computers. Bank checks- scanning devices that recognizes bar codes are called MICR (Magnetic Ink Character Recognition) a magnetic scanning input device.... [tags: Technology Computer]
1017 words (2.9 pages)
- With reference to a contemporary example discuss the relevance of Taylor’s Principles of Scientific Management to organisations today. This essay will discuss the relevance of Taylor’s Principles of Scientific Management to organisations today. Taylor’s theory of Scientific Management is based around how efficiently a member of staff works in order to improve their productivity, the theory was introduced in 1911 and has four principles which were tested to determine optimal work methods, and are still seen in organisations today such as fast-food restaurants.... [tags: Management, Scientific management]
1104 words (3.2 pages)
- The production of waste shows an upward trends in recent years because of the development of economy, the increase of single-person households and the change of the waste resource. Eurostat (2015) shows that waste generation by economic activity and households around 28 contries in EU was 2,514,220,000 tonnes. The amount of waste be generated will over the nature assimilative capacity and will have significant negative external cost. Waste management policies is been used to decide how to control, use and disposal waste.... [tags: Recycling, Waste management, Waste, Pollution]
1315 words (3.8 pages)
- Abstract Advancements in technology have contributed to the new business culture, where the Customer Relationship Management (CRM) is in the centre of a business concern. CRM is a widely implemented strategy for managing and fostering long term, profitable relationships with specific customers (Ling and Yen, 2001). The automated data mining tools made it possible to move beyond the analyses of the past events and data mining tools can be used to address problems that were seen as too time-consuming in the past, providing new opportunities for businesses within relationship management.... [tags: business, management]
2213 words (6.3 pages)
- Performance management is a non-stop process of managing the performances of people to get anticipated results. High‐performing organizations require effective performance‐management systems to promote and grow the values, principles and skills needed to sustain optimal outcomes. (C.K. Sahoo and Sukanta Mishra , 2012) It is very important to direct and support employees to work efficiently, and this can only be successful if a well-structured performance management system is put in place. Nonetheless some organisations don’t get it right.... [tags: Management, Strategic management]
1481 words (4.2 pages)
- Part I Lean Lean is strategy management philosophy derived from Toyota production system which follow the culture of continuous improvement, maximizing value and minimizing waste by focusing on key activities. It is strategy which focuses on increasing customer value by minimizing waste. It involves a series of activities to minimize waste and non-value added activities from the production system through good customer relation, supplier network, factory management and improve the value added process.... [tags: Manufacturing, Lean manufacturing, Six Sigma]
1560 words (4.5 pages)
- Human Resource Sector As discussed previously, the industry sector is constantly short-handed by two engineers in the department with many engineers seeking job offers from other organizations; Palace may be faced with a loss of high productive senior employees. As the government market accounts for 18% of Palace’s products, federal equal opportunity agencies will be around the area in the next six months looking at equal targeted groups working at our organization. This possesses challenges as we had a very low ratio of that target with many vacant key spots in our organization to be filled.... [tags: Management, Management information system]
1467 words (4.2 pages)
- Management support systems have been playing a major role on increasing the productivity of dairy farms over the past few decades. There are many management support systems applied for various segments within the dairy industry to improve continuous decision making and problem solving abilities. This essay covers the analyzation of five different management support systems including evaluation of various theories and models used by each system. 1. Diet Check – A Feeding management support system System ‘Diet Check’ is a widely used feeding Management support system (MSS) in dairy industry to help farmers allocate pasture more effectively, and to provide a balanced supplement to their cows.... [tags: Milk, Dairy farming, Dairy, Cattle]
701 words (2 pages)
- ETL and Data Management ETL Detailed Discussion The system of ETL is in general utilized to join in the data from numerous applications in the systems, characteristically established as well as reinforced by a number of existing vendors or others held on distinct hardware of the computer. The distinct systems comprising the actual data is most repeatedly accomplished as well as run by a number of employees. Referring to example of system used for cost accounting, it is evident that this system would thereby collate the information flow from payroll, transactions as well as acquiring.... [tags: Information Technology]
2013 words (5.8 pages)
- Objective: Explain the pathophysiology of acute renal failure. Include prerenal, intrarenal, and postrenal causes- Pre Renal Impending problems or signs and symptoms involving malfunction of the renal system can be detected by: a. The inability of the patient to urinate known as anuria. b. Flank and side pain c. Painful urination (dysuria) d. Blood in the urine (hematuria) e. Diminished urine output or Urinary Retention f. A generalized feeling of weakness and malaise All of the preceding are signs and symptoms indicating a possible kidney problem.... [tags: Health Care ]
1083 words (3.1 pages)