Remington Ultra Magnum Analysis

441 Words1 Page

The 7mm Remington ultra magnum was introduced in 2000. It was designed to produce ultra high velocities to meet the demand for long range hunting rifles and cartridges. Since it’s introduction it has gained a mild following among long range hunting enthusiasts, but because of a short barrel life many have moved away from it. To help optimize performance Remington engineers produced a chamber design utilizing .400 (10mm) free bore. The free bore acts as a gas expansion chamber, allowing a longer pressure curve to maximize velocity.
Due to this long free bore, bullets with shorter bearing surfaces will have a period of time where they are free of control. This causes the bullet to hit the rifling off center, resulting in poor accuracy. Some rifles are a little more forgiving producing good accuracy with 162-168 grain bullets, others need either the 175 grain SMK or 180 grain VLD in order to produce optimum accuracy. Unfortunately, neither of those are available as factory loads. …show more content…

This is because of gas erosion. This occurs at the start of the rifling. The cut leade which guides the projectile into full engagement of the bore. The barrel life can be extended if you allow it to come to ambient temperatures between shots and clean the powder residues only every 3 shots however, this is somewhat unpractical in the field. Some die hard overbore cartridge fans insist on minimal practice and field usage to extend the life of the barrel, but many competitive shooters think you are far more successful at shooting when you are using the same rifle in practice as you are in

More about Remington Ultra Magnum Analysis

Open Document