Bridge Research “Triangles are the most sound structure for a bridge” (Alise). We have found that triangles are a very good support to build a strong bridge. Some arch bridges and truss bridges use triangles to have better support. Almost all, especially the big and reliable ones are made of steel or iron. However, those materials aren’t all that we need for a strong bridge (thank goodness because we are only allowed balsa wood and wood glue for ours). A really simple bridge is called the beam bridge. A beam bridge is essentially a long platform that is held up with beams on either side. The only problem with this bridge is that if you put too much weight in the center it will start to bow and eventually break. There is very little support to the bridge and that’s why it is only holds small amounts of weight. Train bridges are a really strong type of bridge due to the fact that they need to hold very heavy trains. These bridges take advantage of the strong shape of the triangle. Triangles are strong because if you put force on its point it keeps it shape. This is because if you press on its point the force goes down the sides and should stretch out the bottom. Those factors …show more content…
So, we turn to the suspension bridge for these situations. An example of one is the Golden Gate Bridge in California. These bridges work by using tension, which is basically pulling something tight. So the design of the bridge starts with a deck that is suspended from thick cables that stretch from one side to the other side of the bridge. Those cables are supported by tall towers and are then held down tightly or anchored on both ends of the bridge. These bridges are strong because the force on the bridge gets spread out. The weight going across the bridge creates tension in the cables which then pull down on the towers and anchors on both sides to then hold up the
Have you ever thought about driving over a suspension bridge held up by cables? That’s what the Mackinac Bridge is. With the building of the Mackinac Bridge there has been many positive effects that have come out of it.
Without a concrete reason for the bridge's failure, every suggested reason was researched until proven incorrect” (Silver). There were many reasons that were suggested, but could not be proven correct due to the collapse. Wikipedia states that “A small crack was formed through fretting wear at the bearing, and grew through internal corrosion, a problem known as stress corrosion cracking.” The failure of the bridge was caused by a defect in one of the eye-bars on the north side causing the other side to collapse as well. “Stress corrosion cracking is the formation of brittle cracks in a normally sound material through the simultaneous action of a tensile stress and a corrosive environment.
The Golden Gate bridge, standing as an icon of roadway innovations, took multiple engineers years to design and complete. They could not just simply build an ordinary bridge. They had to take into consideration the physics behind it, as well as, what kind of effect the environment would have upon the bridge. The bridge sits along one of the most active fault lines in the world, so engineers had to make sure their bridge could withstand a little movement. Today the Golden Gate bridge still stands tried and true, as does many other innovations that 20th century engineers came up with.
BRONX- 25 year old man is found dead after driving off the Bronx Neck Bridge with his girlfriend in the trunk of his car at around 2:00am.
The area of where the bridge was to cross the Ohio River was said to be one of the hardest places to build but came with some advantages. The section of the river had a solid rock base for the supporting pier to be built on. Since the engineers knew they could build a pier that would not settle they decided on a continuous bridge design. This design type distributes the weight so the steel trusses could be smaller and riveted together. This alone saved an estimates twenty percent of steel that was originally thought to be need to make the bridge cutting down the cost. The two continuous trusses span a collective 1,550 feet across the water. With addition of the north and south approach viaducts, for trains to go under the bridge, the superstructure’s total length is 3,463 feet. The bridge was made to hold two sets of tracks making the width 38 feet and 9 inches. The design called for 27,000 cubic yards of concrete and 13,200 tons of steel with some members being four foot square beams that span a distance of seventy feet. The design was the first step in a long process that would take several years to
Following the collapse of the I-35 Bridge, other bridges in the country, with similar construction designs, were scrutinized. According to federal statistics, more than 70,000 of the 607,363 or roughly 12 percent of the bridges in the United States are classified as “structurally deficient.”
The Jericho Covered Bridge in Kingsville, Maryland was built in 1865 and restored in 1982. The bridge is 100 feet long and cased in cedar planks and timber beams. Legend has it that after the Civil War many lynchings occurred on the bridge. Passersby were supposedly captured on the bridge and hung from the upper rafters. The bridge is very close to my house and I have driven over it several times. The storyteller, age 19, also lives a couple minutes away from the bridge. He has lived in Kingsville, Maryland his entire life. He recalled a dramatic story he had heard from his older brother involving the haunted bridge.
According to Suspension bridges: Concepts and various innovative techniques of structural evaluation, “During the past 200 years, suspension bridges have been at the forefront in all aspects of structural engineering” (“Suspension”). This statement shows that suspension bridges have been used for over 200 years, and that people are still using them today because they are structurally better bridges. This paper shows four arguments on the advantages of suspension bridges, and why you should use one when building a bridge. When deciding on building a suspension bridge, it has many advantages such as; its lightness, ability to span over a long distance, easy construction, cost effective, easy to maintain, less risk
Golden Gate Bridge held the title as one of the longest bridges for a reason. It has a total length of 2,737 meters with a width of 27 meters. It also has a clearance of 67 meters for ships to pass by. Besides its incredible dimension, its architecture also plays a tremendous role for its beauty. The bridge employs art deco style, a chevron or beveled shape, used to add visual effect. The concrete structures at the ends of the bridge have chevron form as well as the concrete at the base of the towers. There are two shafts in each tower, 90 feet apart decreasing in width as they go up. The two shafts are connected by cross bracing and having four horizontal struts above. The bridge’s art deco design and towers were designed by architect Irving F. Morrow.
Since humans are mortal, the sensation of pain is integral to the human condition. On one hand, pain alerts the body of a danger that is threatening its overall well-being; however, pain can be used as a means of torture to break the psyche or willpower of someone. As Lancelot races to save his queen from the evil Méléagant, he encounters the Sword Bridge. This Bridge is notorious for its slender construction, making it impossible for one
One of the most influential engineering discoveries in the past century was the ill-fated Tacoma Narrows Bridge. “Galloping Gertie” as she was known to local residents, the massive Washington state suspension bridge shook, rattled and rolled its way into the history books. Legendary in its time, the Tacoma Narrows Bridge held many records and drew tourists from around the world in its short life. However, the famous bridge is not known for its creative engineering or speedy construction, unfortunately the bridge was destined to fail. That failure in turn changed the way every building is constructed today as well as further man’s understanding of physics and the forces of nature. In this paper we will examine the history of the Tacoma Narrows Bridge from design to construction, the failure of the bridge, and ultimately the rebuilding project.
The bridge was designed at a time when America was moving toward streamline products, this included the design of bridges. The Tacoma Narrows Bridge was a sleek, graceful looking suspension bridge. Suspension bridges consist of many cables anchored...
The Golden Gate Bridge is a major tourist attraction in San Francisco, California. It is one of the longest suspension bridges in the world and it’s also the top suicide location in the world.The Golden Gate Bridge is a symbol of Northern California. The bridge serves as a means of transportation.
Bridge efficiency is important as it helps reduce cost of building while maximizing the strength of the bridge. Many things can influence the bridge’s strength and weight, but the two main things that can cause a bridge to be a failure or success is the design of the bridge and construction of its joints. In order to build a potent balsa truss bridge, it is crucial to know how the layout of members and style of gluing can help increase or decrease strength.